Description
Accurately Get The True Level & Angle In One Go!
“I own a woodworking shop and needed a way to make sure my saws & cuts were dead on. This product was recommended by a friend who had bought one. I have put all my saws perfectly straight. It is a tool that I can’t work without. Every cut is dead on precise since I started using this gauge. This is an amazing product. I highly recommend it!” - Trevor Miles
Why Buy Our Mini Level & Angle Gauge?
✅ACCURATE: This gauge has two measuring modes that can check the true level and find the relative angle between two surfaces, providing accurate, quick, and clear measurements. It is designed with an accuracy of ± 0.2° and a resolution of 0.1, which can give convenience in woodworking, construction, machinery, telecommunications, automobile, etc.
✅MAGNETIC: It has a large LCD with a backlight and a strong magnetic base for hassle-free operation. With only one AAA battery, the digital angle gauge works for 50 hours on average and can automatically shut off after 5 minutes.
✅PORTABLE: With its small size, you can easily carry & store it anywhere. It is also easy to use, simply switch it between Absolute and Relative measuring modes and start measuring.
❗REMINDERS❗
- When the device tilts diagonally over 30 degrees, it will display “ERRO” instead of an angle. Because in this situation, this angle gauge is not accurate as it should be.
- The recalibration instruction is shown in the manual.
- Applications:
- Setting blade angle of Table Saw
- Setting blade angle of Miter Saws
- Setting blade angle of Circular Saws
- Tool setting on Lathes
- Setting workpiece angle for milling
- Drainage angles and run-off slopes
- Grader and tractor work alignment
- Platform monitoring
📋Frequently Asked Questions:
Q: How can I recalibrate this level?
A: The device has been pre-calibrated at the factory. It should only be recalibrated if it has been dropped.
Q: Does this have magnets on all four sides?
A: It only has magnets on the bottom.
Q: Can the backlight be disabled?
A: Sorry. The backlight could not be turned off.
GRAB YOURS NOW!
Customer Reviews
Perfect tool for every table saw owner. Like many users, I have a table saw on a dolly to move it around. Having a super simple way to calibrate and measure angles is essential, and this is so much faster and more precise than my eyes and a protractor.
This tool is essential for getting accurate adjustments on my table saw blade. The resolution seems to be within 0.1 degree which is fine for woodworking use. Would recommend it to anyone thinking of getting one of these. The floor my table saw sits on is not level, so the relative angle function is perfect for getting a 90-degree angle between my saw blade and my (not-so-level) table.
Nice product, easy to read and very accurate
I used this to adjust my table saw blade to make some miter cuts. This angle gauge was easy to use and did what was described it would do. I will also use this to test the accuracy of my miter saw. The backlight is bright and really easy to read.
I bought this angle finder after one project and before another and figured out why my crown molding was never fitting perfectly. The tilt on my compound miter saw has such tiny markings that are impossible to get precise. My 45º stop was off by a little and whatever I was measuring in between was off by nearly 2º. This thing is also very durable, it survived getting pitched after being left magnetized on the blade 3 times.
You may also like
Recently viewed
Customer Reviews
Perfect tool for every table saw owner. Like many users, I have a table saw on a dolly to move it around. Having a super simple way to calibrate and measure angles is essential, and this is so much faster and more precise than my eyes and a protractor.
This tool is essential for getting accurate adjustments on my table saw blade. The resolution seems to be within 0.1 degree which is fine for woodworking use. Would recommend it to anyone thinking of getting one of these. The floor my table saw sits on is not level, so the relative angle function is perfect for getting a 90-degree angle between my saw blade and my (not-so-level) table.
Nice product, easy to read and very accurate
I used this to adjust my table saw blade to make some miter cuts. This angle gauge was easy to use and did what was described it would do. I will also use this to test the accuracy of my miter saw. The backlight is bright and really easy to read.
I bought this angle finder after one project and before another and figured out why my crown molding was never fitting perfectly. The tilt on my compound miter saw has such tiny markings that are impossible to get precise. My 45º stop was off by a little and whatever I was measuring in between was off by nearly 2º. This thing is also very durable, it survived getting pitched after being left magnetized on the blade 3 times.